walimex pro Radio Trigger W1 TTL T-F No. 21705

Product information "walimex pro remote control W1 TTL T-F"
Wireless 2.4GHz wireless remote control, control for Walimex pro Studio Battery Flash2Go and Light Shooter TTL up to 100 m distance
Supports u.a. TTL auto flash, flash exposure compensation and flash bracketing, high-speed sync, second shutter curtain
Remote control of all important functions of the flash such as power and flash mode (mode: manual, multi, TTL), modeling light, up to 5 groups and 32 channels
For Fujifilm cameras like X-Pro2, X-T20, X-T2, X-T1, B X-Pro1, X-T10, X-E1, X-A3, C X100F, X100T (nicht alle Kameras unterstützen alle Funktionen).
Radio remote control W1 TTL with clear large display and easy operation, requires 2xAA batteries / rechargeable batteries - not included

Reliable control and lightning-fast tripping
The W1 TTL radio remote control is tuned to Canon cameras with TTL function. It can control flashes that have the Walimex per W1 receiver system installed (for example Light Shooter 360 TTL, Flash2Go 600 TTL) directly via radio (2.4 GHz). The camera with W1 radio remote control controls the exposure fully automatically in TTL mode without the need for manual adjustment. With the wireless shutter release Walimex pro W1 TTL, the data is transmitted to the flash or several flashes at lightning speed and these are adjusted accordingly and triggered with minimal delay. The maximum synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). If a slightly different exposure is desired in TTL mode, the exposure can be manually adjusted three stops up or down (in one-third increments). Also a multiple exposure series is possible. Thus, based on the TTL measured values, an underexposed, a normal-exposed and an overexposed image are created, from which the appropriate one can then be selected. The wireless release W1 TTL T-S simultaneously controls up to 5 flash groups (with one or more flashes). 

Fully automatic or manual settings
As an alternative to fully automatic TTL exposure, you can also individually control the flash output using the W1 radio control. Each flash, or each flash group can be controlled individually, so that they can easily set even difficult to reach flashes during the shooting. In addition to the manual mode, the radio remote control also supports the Multi mode (strobe function). All relevant parameters such as the number of flashes, frequency and power can be controlled via the remote control. The maximum supported synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). Exposure is possible at appropriate shutter speeds on the first or second curtain.

Intuitive to use
The remote control requires 2 standard AA batteries or rechargeable batteries (not included in delivery). A clear display makes it easy to set the important parameters. The settings are simple and, to a large extent, intuitive. A detailed manual (German and English) also helps with tricky photo shoots.

Tested camera models
The remote trigger has been tested on the following Fujifilm camera models: X-Pro2, X-T20, X-T2, X-T1, B X-Pro1, X-T10, X-E1, X-A3, C X100F, X100T (nicht alle Kameras unterstützen alle Funktionen). If your model is not listed here, we recommend a self-test and possibly a USB firmware upgrade.

Technical specifications

W1 TTL T-F
Compatible cameras  Fujifilm cameras  Supports cameras with PC sync connection
Built-in remote transmission system  Radio 2.4 GHz
modulation operation  MSK
power supply  2 * AA batteries
exposure

Manual adjustment Yes
Yes
TTL Auto Flash E-TTL
TTL
Multiple flash
Yes
TTL

High-speed synchronization
Yes
Flash exposure compensation
Yes, ± 3 in 1/3 increments
Flash Exposure Lock
Yes
Focusing light beam
switch on manually
Sync. 2nd shutter curtain
Yes (setting on the camera)
Wireless Flash

wireless function
In TTL mode, flash ratio not adjustable
In M mode, flash ratio (A: B C)
Support of lightning groups, group A - E
can be set individually
Controllable slave group
Normal 3 (A, B, C)
extends 5 (A, B, C, D, E)
Transmission range (approx.)  up to 100 m
channels  32
other

Setting the synchronization delay  Yes (0 ~ 10 ms, unit 100 μs)
beep  ON OFF
ZOOM setting  Control the zoom setting of the flash over
the transmitter  Output interface
Sender: Connecting to input and output via  PC cable
Firmware Upgrade  Upgrade via micro USB port
memory function  Settings will be for 2 seconds after the
saved last action and after a  Restart restored
Mass weight  72x75x52 (mm) / 90g